Instructions and manual for Jet Tools JSS-16 in Russian

Warranty

Page 9

• Image
• Text

9

1. The warranty period is 2 years calculated from the date

sales. The date of sale is the date of registration of shipping documents and/or the date of filling out the warranty card.

2. This Supplier’s warranty gives the right

The buyer receives free repair of the product in case of detection of defects related to materials and workmanship.

3. Warranty, as well as non-warranty and after-

Warranty repairs are performed only at service centers specified in the warranty card or authorized service centers.

4. Equipment is accepted for warranty repair

with the obligatory presence of correctly executed documents: a company warranty card indicating the serial number, date of sale, the stamp of the trade organization and the signature of the buyer, as well as in the presence of documents certifying the purchase (cash or sales receipt, invoice).

5. The warranty does not apply to:

— replacement accessories (accessories) and equipment for equipment, for example: drills, drills; drilling, turning and milling chucks of all types, cams and collets for them; soles of grinding machines, etc. (see list of replacement accessories/accessories); — mechanical protection devices for the machine (safety clutches, safety gears and safety pins), electrical circuit protection devices; — wear parts with a limited resource, for example: carbon brushes, drive belts, protective covers, guides and feed rubber rollers, bearings, timing belts and wheels. Replacing them is a paid service; — equipment with the serial number completely or partially erased; - power cords. In case of damaged insulation, replacement of the power cord is mandatory.

6. Warranty repairs are not carried out in

in the following cases:

— when using the equipment for purposes other than those specified in the operating instructions;

*The following obligations are general in nature and apply to the entire range of equipment. Detailed Warranties for each equipment model, taking into account its features, are displayed in the corresponding operating instructions.

— in case of external mechanical damage to the equipment; — if deficiencies arise due to non-compliance with storage and transportation rules, force majeure circumstances, as well as adverse atmospheric or other external influences on the equipment, such as rain, snow, high humidity, heating, aggressive environments, etc.; — if damage occurs due to non-compliance with the operating conditions specified in the instructions or making design changes (see the chapter “Safety precautions”); — if deficiencies occur due to voltage surges in the electrical network or incorrect connection of equipment to the electrical network; — when foreign objects enter the equipment, for example, sand, stones, insects, materials or substances that are not waste accompanying the intended use; — in the event of deficiencies and breakdowns due to failure to carry out scheduled technical and preventive maintenance, cleaning and lubrication of equipment prescribed in the operating instructions, or independent implementation of design changes.

7. Warranty repairs partially or completely

the possibility of disassembled equipment is excluded.

8. Obligation to monitor the technical condition

Therefore, it is the responsibility of the buyer to carry out setup, adjustment, commissioning and scheduled maintenance.

9. Setup, adjustment, adjustment, technical

Maintenance and preventative maintenance of equipment (for example: cleaning, flushing, lubrication, replacement of technical fluids) is not a warranty service.

10. At the end of its service life, it is recommended

Contact the service center for a preventive inspection of the equipment.

11. The equipment is removed from the warranty in service

in case of violation of the operating rules specified in the operating instructions.

Warranty

*

Design and description of equipment components

Appearance

Before purchasing a machine, you need to familiarize yourself with the specifics of its design and the location of the main components. To do this, it is recommended to study the technical data sheet in detail. Additionally, you can read reviews about the JET JSS-16 machine, which will help you form an objective opinion about its performance qualities.

The layout of the machine is desktop, which provides a minimum working space for installation. The electric motor is located in the lower part; the rotational motion is converted into translational motion using a crank mechanism. The locking handle for the blade is combined with the tension block and is located in the upper part.

The features of the machine include the following advantages:

• desktop rotation function. The maximum angle is 45°;
• improving the quality of processing. For this purpose, the design provides a system for removing chips from the cutting area. A transparent protective screen is also installed;
• pipe for connecting the chip ejector. Its diameter is standard and is 35 mm;
• Possibility of adjusting the saw stroke frequency. This is done using a switch, which is located at the bottom of the structure next to the control unit;
• minimum noise level. This became possible thanks to the use of a belt drive.

In general, the machine is the best option for equipping small-scale production or a home workshop. Reviews indicate the good quality of the equipment. The manufacturer managed to combine all the advantages of compact equipment. At the same time, the price for it is more than affordable. The average cost of the machine is 11,200 rubles.

To prevent overheating of the power unit, an asynchronous electric motor model was installed. Additionally, there is protection that automatically turns on when the maximum permissible power value is reached.

Reviews of the jigsaw machine

To identify the actual positive and negative factors in the operation of the machine, it is recommended to read real reviews and its owners. However, it is necessary to take into account their subjectivity - the quality of material processing largely depends on personal skills and compliance with the rules of working on this equipment.

• I purchased a JET machine for working around the house, as I have been interested in carpentry for a long time. The unit has optimal parameters in its price category. Among the advantages I can highlight a convenient design, low weight and the ability to adjust the frequency of movements of the saw. In my opinion, the disadvantage is the inconvenient mechanism for fixing the canvas. During prolonged operation, the clamp becomes loose.
• I have been modeling professionally for a long time. To process plywood, I decided to purchase a JET jigsaw. The unit is small and fits easily on my desk. But due to the low mass, vibration occurs at high speeds. I also noticed that at idle there is a beat in the lower part of the blade. The speed control mechanism is very convenient - you can change the frequency of movement of the saw without turning off the machine. I do not recommend using the files included in the kit. It's best to buy original ones.

The video shows an example of modernizing a jigsaw machine model JET JSS-16:

Machine Specifications

Machine components

To become familiar with the parameters of the JET JSS-16 machine, you must read the operating instructions. It contains the main technical characteristics, as well as operating rules and safety procedures.

Thanks to its small dimensions, 65*31.5*35.6 cm, the unit can be installed on a standard desktop. The weight of the assembled machine is only 15 kg. But it must be taken into account that processing sheet materials of a large area will require additional surface. The maximum thickness of the workpiece cannot exceed 50 mm.

Main technical characteristics of the jigsaw machine:

• working web feed speed limits - from 400 to 1600 dv/min;
• saw blade size is 127 mm;
• the working stroke of the tool does not change and is equal to 15 mm;
• desktop surface size - 41*25.3 cm;
• the table can only be rotated to the left at an angle of no more than 45°;
• the console has dimensions of 40.6 cm.

The standard equipment of the machine includes a transparent protective screen, 5 saw blades and a set of hex keys. To remove chips from the processing area, you can install a fan, which is also included with the equipment. The unit is designed for connection to a 220 V household power supply. The electric motor power is 80 W.

For maximum stability, the body is made by casting. Additionally, this helps to reduce the noise level, as well as partially dampen the vibrations that appear during operation of the electric motor.

Operating rules

Working on the machine

Working with a jigsaw is extremely simple. But to ensure maximum processing quality, it is necessary to familiarize yourself in detail with the operating rules of the equipment. The same applies to compliance with safety measures.

First of all, you need to decide on the installation location. The surface of the working table must be flat and sufficiently stable. The design has the ability to adjust the position level using the legs.

During operation, the following requirements must be observed:

• checking the condition of units and components of equipment;
• using jigsaws with the parameters specified in the operating instructions;
• when processing large workpieces, additional stops and supports should be used;
• removal of debris and sawdust is carried out only after the final stop of the machine;
• mandatory use of personal protective equipment - work glasses, long sleeves and a respirator.

Severe vibration can occur if the angle limiter is incorrectly installed or has incorrect settings. Saw blades are replaced even if minor defects appear.

When the motor protective relay is triggered, the machine must be completely de-energized. If after some time its performance is not restored, you should contact a specialized repair and maintenance center.

Catalog

The JET JSS-16A jigsaw is an amateur equipment that allows you to cut complex radii in wooden, plastic products, plywood, and chipboard. The design is improved compared to the previous model and has several distinctive features. Thus, as equipment on the machine, you can use not only pin, but also pinless files with a length of 127 mm. This model also received changes in terms of the orientation of the cutting plane: along and across the longitudinal axis of the machine, which allows you to choose the most familiar and comfortable working position. The permissible sawing depth is 50 mm, and the product width can reach 406 mm.

Execution and features

• The JSS-16A has a compact, ergonomic design. Thanks to its small dimensions, the equipment saves space in the workshop. The tool has a comfortable top placement of the handle for quick tensioning/loosening of the blade.
• The table is made of cast aluminum and can be adjusted in angle from 0-45 degrees for cutting at an angle to the surface. The angle of the saw table is determined using a transport scale located on the end side of the machine. The selected position is fixed using a stopper.
• The operation of the equipment is ensured by an economical single-phase motor consuming 0.9 kW, the power of which is sufficient to perform operations in a private workshop.
• This model is equipped with an electronic speed control system, which helps maintain thermal balance and minimize operating vibrations. The oscillation frequency of the saw can be smoothly adjusted in the range from 550 to 1600 strokes/min, taking into account the hardness of the material being processed.
• The body of the machine contains an organizer for storing files and other accessories. Convenient fastening of pin files is provided.
• To ensure the cleanliness of the operating area, a chip removal casing and a chip blowing system are provided. A Ø35 mm pipe is installed to connect the dust removal device. To protect against injury, the cutting area is covered with a transparent screen.

Advantages:

• compact sizes for limited spaces;
• smooth change in speed;
• versatility of saw blade fixation;
• fitting for chip removal device;
• thoughtful ergonomics;
• ease of setup and operation;
• adjustable clamp;
• protective screen to prevent injury.

Equipment:

• Set of five saw blades with pin
• Adapter for mounting saw blades without pin

JET JSS-16A jigsaw machine article 10000808MA is affordable equipment for amateur processing of wooden workpieces, which can be purchased on our website. The stated price includes five saw blades with a pin and an adapter.